So, I was working on my entry for the Broke Family Building Contest, and a few questions… Oddly enough, this is my first time building on a budget, I usually just do whatever I feel like, and those of you who have seen my buildings might notice I tend to shy away from starter homes. Thus, sorry beforehand if my questions are dumb hah.
In any case, I am freaking out a bit because there are two days left and I am about 10000 over budget. I had finished the three main buildings with 20000 left and was feeling good about that as the furnishing budget. But then I started working on two smaller foundation structures and all of a sudden I was way over budget without realizing how. I start deleting bits of the foundation and it just costs extra! I read Twinmum’s thread about foundation costs but I do not know what to do. I would delete the entire foundation structures… but they are just so beautiful I cannot bring myself to do it.
So here is what I did to reduce costs so far. I deleted as many extra walls as I could. Again, those of you familiar with my work might notice I tend to wall curve a lot, so after wall curving it is ridiculously difficult to augment or reduce the size of your structure without ruining the entire form of it. For those of you unfamiliar with wall curving, basically it would almost be easier to start over from scratch than reduce the size of a building that has been wall curved. For instance, if any of you have seen the building of mine titled Gout de la Musique, in order to reduce the size of the guitar, I would literally need to rebuild the entire thing. But now, there is not much time to rebuild the Broke Family Manor from scratch. After deleting as many walls as I could, I started using the free floor tiles for… everything… literally everything. I also used the least costly wall covering with redesigns, and I used the free wall covering as well, at least where I could without making it too ugly (why does the only free wall covering have a small border around it and lines down it sigh, you cannot even recolor it into an even design!). I also started deleting single tile areas of wall for doors… that way I saved on the cost of the door as well as the single deleted tile of wall hah. I used all the least costly furniture I could. I even used the free flowers and grass statues to landscape. I took a look at the other buildings already listed in the contest, and my structure does not seem bigger than any other, so I am really clueless as to why it would cost so much.
In any case, my questions are threefold. I understand they might be difficult to answer without seeing the building, but of course no showcasing beforehand hah. Also, if any of these questions are not allowed by the rules, do ignore them. I reread the rules and did not see anything but just in case.
First, does anyone know how to reduce the cost of foundation. Or maybe ways to reduce cost that I did not mention already. I did read the thread about building that was created by Chuckles and I cannot use those techniques.
Second, and I know this is likely a resounding no, but are we allowed to toss in extra model furniture and stuff like a car for image taking and then delete them or should everything in our images be included in the total cost.
Lastly! If I cannot figure out how to reduce the cost by 10 grand by the 23 Feb, might I be allowed to submit the building to showcase but not be officially in the contest due to overbudgeting. I understand it would not be in the voting, but it took a fair chunk of time to create so it would be nice to showcase it. I know I could just delete stuff to get it to below 100k, but, as most of you other builders must know, it is just so hard to delete something you created that you like. My last creation sits at 950k so for me 110k is quite the achievement anyway hah.
As always, thanks for taking the time to read that!