« previous next »
Pages: [1]   Go Down

Author Topic: Going up! (but not down... )  (Read 10325 times)

Offline Whitewings

  • Llama Wrangler
  • **
  • Posts: 69
Going up! (but not down... )
« on: April 19, 2012, 12:14:22 PM »
In my current family's home, I have several levels of construction, one at, one above, and three below ground level, with a single spiral staircase running through them. My Sims can go up the stairs easily, but going down is a  complete failure, except for the bottom two levels. Does anyone know what's wrong? Is it that the stairway has walls on its sides on the first below-ground level and at the ground level? Do I need to leave a square open on every side?

I've included the house in question; it uses nothing but standard EA content (some of the components are from expansion packs)
Logged

Offline Twinmum

  • Building inspector and trouble shooter
  • Global Moderator
  • Watcher
  • ******
  • Posts: 2883
Re: Going up! (but not down... )
« Reply #1 on: April 19, 2012, 05:34:46 PM »
How close is the wall to the stairs? Have you had a look at the stair guide here on site. There is a little on spiral stairs and walls around them. I can't download it now, but if you haven't resolved the problem, I can take a look at it this afternoon (it's currently 7.30 am here).


Logged
Have you read the Forum Rules?
And please try to remember Capitals, Commas and Apostrophes when you post.
Check out  Twinmum's creations on the Gallery for Sims 4 creations and Twinsom Realty for my Sims 3 Creations
For something non Sims - check out the miniatures I make at MiniisByTwinmum


Registered members do not see ads on this Forum. Register here.

Chuckles_82

  • Guest
Re: Going up! (but not down... )
« Reply #2 on: April 19, 2012, 06:16:51 PM »
I remember having the exact same problem with my treehouse stairs, but I can't remember what fixed it.
Logged

Offline Twinmum

  • Building inspector and trouble shooter
  • Global Moderator
  • Watcher
  • ******
  • Posts: 2883
Re: Going up! (but not down... )
« Reply #3 on: April 20, 2012, 01:03:01 AM »
I downloaded your house, but for some reason, it won't install. If you haven't resolved the problem, can you post a screenshot of the different levels where the stairs are?
Logged
Have you read the Forum Rules?
And please try to remember Capitals, Commas and Apostrophes when you post.
Check out  Twinmum's creations on the Gallery for Sims 4 creations and Twinsom Realty for my Sims 3 Creations
For something non Sims - check out the miniatures I make at MiniisByTwinmum

Offline Whitewings

  • Llama Wrangler
  • **
  • Posts: 69
Re: Going up! (but not down... )
« Reply #4 on: April 24, 2012, 01:54:18 PM »
Quote from: Twinmum on April 20, 2012, 01:03:01 AM
I downloaded your house, but for some reason, it won't install. If you haven't resolved the problem, can you post a screenshot of the different levels where the stairs are?
It requires World Adventures, Generations, and Showtime expansions.
Logged

Offline Twinmum

  • Building inspector and trouble shooter
  • Global Moderator
  • Watcher
  • ******
  • Posts: 2883
Re: Going up! (but not down... )
« Reply #5 on: April 24, 2012, 05:31:36 PM »
I have all the EP's and Stuff packs, but it wouldn't install. Kept telling me to check I had all the correct updates. Same message I get sometimes on bits of CC.
Logged
Have you read the Forum Rules?
And please try to remember Capitals, Commas and Apostrophes when you post.
Check out  Twinmum's creations on the Gallery for Sims 4 creations and Twinsom Realty for my Sims 3 Creations
For something non Sims - check out the miniatures I make at MiniisByTwinmum

Offline Ricalynn

  • Herder of Raptors, Pineapples, Grims, Gnomes, Alphas & Sassypants Squad.
  • Watcher
  • ******
  • Posts: 8365
  • Addicted to Dynasties? *shifty eyes* Not me.
Re: Going up! (but not down... )
« Reply #6 on: April 25, 2012, 12:04:02 PM »
I was having this issue during the llama interior building contest.  I ended up having to move my stairs a so that instead of the squares being straight they were diagonal.  It had something to do with the place the sims would be standing when they left the staircase.  It can't be towards a wall and you can't have pictures, windows or anything nearby.
Logged
Origin ID: Ricalynn | Discord: Rica#5389
Current Active Stories: Stayin' Alive: Take 5 - Story about A Grim

Please read and follow the Forum Rules.

Stories: Artie | The Race | Grim Chronicles | Revenge | Licious | Artie's TS4 Dynasty | Grim Rivalries | Speed Dreamin'


Registered members do not see ads on this Forum. Register here.

Offline Whitewings

  • Llama Wrangler
  • **
  • Posts: 69
Re: Going up! (but not down... )
« Reply #7 on: May 14, 2012, 11:34:30 PM »
I finally found the problem. A spiral stair can have its "back" in a corner, but you must leave a square clear along both of the other two sides
Logged
Pages: [1]   Go Up
« previous next »