Author Topic: Cannot intersect object, where no object exists-Solved  (Read 27488 times)

Offline JSBrantner

  • Townie
  • ***
  • Posts: 176
Cannot intersect object, where no object exists-Solved
« on: November 12, 2012, 01:01:46 AM »
I am having an issue with invisible objects being in the way of Sim movement/interactions. It started out in a small area outside and has since moved into areas inside the house on both the 1st and second floors. The third floor and basement are unaffected. My sims walk around these areas and cannot interact with some items in the affected areas. This is my Life States Dynasty game and I am concerned that if this continues to spread there will be no areas left unaffected. I cannot place objects or walls due to the 'cannot intersect objects' warning. I have tried going into build/buy mode to grab and delete, but cannot find anything to grab onto. Moveobjects on has no affect. Using the sledgehammer only succeeds in demolishing the floor or wall, but not whatever object is causing the problem.

1st floor

I moved everything out and went a little fence happy, but the blank areas are the areas where I could not place a fence due to 'cannot intersect object'


2nd floor


Those three rooms are the only problems on the second floor, so far.
Jaymi

Offline samoht04

  • Building Contest Coordinator
  • Global Moderator
  • Watcher
  • ******
  • Posts: 9202
Re: Cannot intersect object, where no object exists
« Reply #1 on: November 12, 2012, 01:44:00 PM »
That is indeed a weird bug. Have you tried constrainfloorelevation? Try using that cheat and then flattening over the area just to make sure that it isn't a terrain bug that is stopping you from using those areas. If that doesn't work I'd say the only other option would be to rebuild completely.  :-\
Please read the Forum Rules![/center]



Registered members do not see ads on this Forum. Register here.

Offline JSBrantner

  • Townie
  • ***
  • Posts: 176
Re: Cannot intersect object, where no object exists
« Reply #2 on: November 12, 2012, 09:55:54 PM »
Thanks samoht. I need to make sure that's an acceptable cheat for a Dynasty file, and give it a try. I now have an area on the third floor that is affected. Very frustrating. Gen 4 just became a teen, so I am somewhat close to finishing.
Jaymi

Offline JSBrantner

  • Townie
  • ***
  • Posts: 176
Re: Cannot intersect object, where no object exists-Solved
« Reply #3 on: November 14, 2012, 02:58:32 PM »
Sending the family and house to clipboard, bulldozing lot and then replacing house and family solved the problem.
Jaymi