« previous next »
Pages: [1]   Go Down

Author Topic: Edit town  (Read 4058 times)

jaytea

  • Guest
Edit town
« on: October 22, 2011, 09:23:37 PM »
I'm trying to add an equestrian center to Sunset Valley. However, the land is not flat even though I bulldoze. When I place the building, it looks awful. Is there anyway to smooth the land out?
Logged

Offline pallyndrome

  • Watcher
  • ******
  • Posts: 2579
  • The Goanna
    • Hannah Goanna
Re: Edit town
« Reply #1 on: October 22, 2011, 09:54:05 PM »
I had a lot of trouble placing the equestrian centre in Barnacle Bay. I had to find a lot flat enough that the entrance would have a flat path for quite a way - otherwise, horses cannot enter. I played around with two custom-placed lots that were too hilly, before I moved a park that wasn't placed by me, and put the equestrian centre there instead. So my suggestion would be to find a lot with a big open flat space, move whatever's on it somewhere else, and place the equestrian centre there.
Logged


Registered members do not see ads on this Forum. Register here.

Offline Ricalynn

  • Herder of Raptors, Pineapples, Grims, Gnomes, Alphas & Sassypants Squad.
  • Watcher
  • ******
  • Posts: 8365
  • Addicted to Dynasties? *shifty eyes* Not me.
Re: Edit town
« Reply #2 on: October 22, 2011, 10:24:33 PM »
Unless you have filled them with houses the two 40x40 lots over by Christopher Steel's original house are perfect for petite equestrian center.
Logged
Origin ID: Ricalynn | Discord: Rica#5389
Current Active Stories: Stayin' Alive: Take 5 - Story about A Grim

Please read and follow the Forum Rules.

Stories: Artie | The Race | Grim Chronicles | Revenge | Licious | Artie's TS4 Dynasty | Grim Rivalries | Speed Dreamin'

Offline ejnarts1

  • Townie
  • ***
  • Posts: 100
Re: Edit town
« Reply #3 on: October 23, 2011, 12:06:27 AM »
Are you seeing a sudden dip at the edges of the lot when you place it? A picture would be helpful. BUT, you may want to try using the code:

SetImportedTerrainOffset (value) [from .5 to -.5. I usually find that .1 to .2 works...sometimes 0.0]

Type it in before you place the lot. Then check the elevation before you click okay. If it's not level, cancel and type in another value.

If that is the problem, hopefully this will help  :)
Logged

Sportsfan

  • Guest
Re: Edit town
« Reply #4 on: October 23, 2011, 01:03:04 AM »
Where do you enter that?
Logged

Offline Pam

  • Community Manager
  • Forum Founder and Friend
  • Watcher
  • ******
  • Posts: 14791
Re: Edit town
« Reply #5 on: October 23, 2011, 01:57:05 AM »
I'm moving this to the Technical Help board because it doesn't relate to actual game play.
Logged
Read and heed the Forum Rules, please!

Support the site when you purchase online!
Dreamweaver Immortal Dynasty
Dreamweaver 4 x 4 Dynasty
Pam's Sims 4 World Blog

"Half of my posts are correcting people. The other 49% is moving threads."

jaytea

  • Guest
Re: Edit town
« Reply #6 on: October 23, 2011, 06:19:26 AM »
Thank you so much everyone, very helpful.  Just one more question is the 'set elevation' a cheat?
Logged


Registered members do not see ads on this Forum. Register here.

Offline ejnarts1

  • Townie
  • ***
  • Posts: 100
Re: Edit town
« Reply #7 on: October 23, 2011, 02:00:34 PM »
Yes, it's a cheat. Bring up the cheat bar and type away   :)
Logged

Fellly

  • Guest
Re: Edit town
« Reply #8 on: November 02, 2011, 10:45:06 AM »
I used to have that problem and I solved it this way:

Enter the game and place the lot you say. Rotate it if it needs to be rotated and Accept.
Click the lot and go to Build/Buy mode
Enter the cheat "TestingCheatsEnabled true" and then "ConstrainFloorElevation false"
Select the "Flatten Lot" option in build mode.
You should now see the building on a nice flat lot BUT in case there are windows and doors, they may be a little out of place. You just need to re-place them.
Logged
Pages: [1]   Go Up
« previous next »