Author Topic: Windows 10 RTM (Release to Manufacturer)  (Read 5313 times)

Offline tonycdh

  • Townie
  • ***
  • Posts: 126
  • What does the llama say?
    • Me
Windows 10 RTM (Release to Manufacturer)
« on: July 23, 2015, 01:19:37 AM »
Just thought I would throw out a little fyi. Currently running full version of Windows 10 and origin and Sims 4 are all still doing what it should be doing. I know W10 goes live and is free on July 29th, so just in case anyone is wondering about compatibility issues. I haven't had any whatsoever. :-)  Sim on party people! 

Offline Flynn Arrowstarr

  • Administrator
  • Immortal
  • ******
  • Posts: 799
  • Semi-conscious
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #1 on: July 24, 2015, 01:07:26 PM »
Just thought I would throw out a little fyi. Currently running full version of Windows 10 and origin and Sims 4 are all still doing what it should be doing. I know W10 goes live and is free on July 29th, so just in case anyone is wondering about compatibility issues. I haven't had any whatsoever. :-)  Sim on party people!
Great to hear. I was able to run Sims 2 Ultimate Collection, Sims 3 (all expansions/stuffs) and Sims 4 on Windows 10 10130. I didn't try the original Sims, but I would think with a little tweaking it should work as well. :)

Flynn
Check out Flynn's Fineries for houses, Sims and helpful articles.

Read and heed the Forum Rules, please!



Registered members do not see ads on this Forum. Register here.

hazysmith

  • Guest
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #2 on: July 25, 2015, 02:14:51 PM »
This is good news, my IT guru has advised me to get it but I still need to play my sims!

Sent from my Hudl HT7S3 using Tapatalk


Offline simmum

  • Llama Wrangler
  • **
  • Posts: 73
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #3 on: September 09, 2015, 09:18:07 AM »
Rather than create a new thread, I'm just wondering if anyone has upgraded to Windows 10 since it's release and if it's running Sims 4 and 3 fine? I've got an invitation to upgrade for free and am very tempted but don't want to if it's going to cause problems. Thanks

Offline JudesSims

  • Sim Addict - and Proud of It!
  • Watcher
  • ******
  • Posts: 1988
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #4 on: September 09, 2015, 09:59:17 AM »
Windows 10 has caused no problems in my games at all.

Offline dodi90

  • Occult
  • ****
  • Posts: 280
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #5 on: September 10, 2015, 09:27:46 AM »
So far so good, while I don't have sims 3 at the moment to confirm, the Sims 4 do run flawlessly on Windows 10. The Sims 2 however did run poorly on my part but that is more because that game was poorly optimized on modern machine.

Offline ClayMask

  • Watcher
  • ******
  • Posts: 1143
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #6 on: September 10, 2015, 10:09:05 AM »
I'm also using Windows 10 to run The Sims 4, and haven't had any trouble with it.



Registered members do not see ads on this Forum. Register here.

Offline XxMousiexX

  • Townie
  • ***
  • Posts: 105
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #7 on: September 16, 2015, 09:56:15 PM »
Don't used Windows 10 it has Government (NSA spyware) Hears everything you say

Offline Twinmum

  • Building inspector and trouble shooter
  • Global Moderator
  • Watcher
  • ******
  • Posts: 2883
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #8 on: September 16, 2015, 11:40:31 PM »
Don't used Windows 10 it has Government (NSA spyware) Hears everything you say

Do you have a reliable source for this information or is it just something that is being spread around by anyone that will share it?
Have you read the Forum Rules?
And please try to remember Capitals, Commas and Apostrophes when you post.
Check out  Twinmum's creations on the Gallery for Sims 4 creations and Twinsom Realty for my Sims 3 Creations
For something non Sims - check out the miniatures I make at MiniisByTwinmum


Offline tonycdh

  • Townie
  • ***
  • Posts: 126
  • What does the llama say?
    • Me
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #10 on: September 17, 2015, 12:21:40 AM »
I don't believe this post or forum is about what risks are associated with a persons operating system to your personal information.  It only has to do with regards to the sims.  Sounds like a conspiracy theory to me personally. 

Offline XxMousiexX

  • Townie
  • ***
  • Posts: 105
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #11 on: September 17, 2015, 12:33:29 AM »
@tonycdh

Only trying to help you if you like your privacy. here's another link you may want to check out: http://www.full-spectrum-dominance.com/

Scroll & read

Your Welcome

Offline tonycdh

  • Townie
  • ***
  • Posts: 126
  • What does the llama say?
    • Me
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #12 on: September 17, 2015, 01:15:28 AM »
No fear people!  You can opt out of these so called privacy issues as well. http://www.networkworld.com/article/2955710/microsoft-subnet/windows-10-installation-customize-settings-versus-express-settings.html.
People are always going to find pros and cons to all things. I personally like Windows 10 for The Sims. More so than 7 or 8. That's my personal opinion of course.

Offline XxMousiexX

  • Townie
  • ***
  • Posts: 105
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #13 on: September 17, 2015, 01:32:32 AM »
@tonycdh

I wasn't trying to Fear Monger ppl was just only concern for them & you

Offline Twinmum

  • Building inspector and trouble shooter
  • Global Moderator
  • Watcher
  • ******
  • Posts: 2883
Re: Windows 10 RTM (Release to Manufacturer)
« Reply #14 on: September 17, 2015, 02:34:07 AM »
Yes it does have a lot of privacy issues it seems, but as has been pointed out, a bit of work and you can opt out of them. Really, information has been gathered for some time now in many programs and such. If you take the time to read policies, many say that information can be gathered on usage, which many would call a form of spying.
Have you read the Forum Rules?
And please try to remember Capitals, Commas and Apostrophes when you post.
Check out  Twinmum's creations on the Gallery for Sims 4 creations and Twinsom Realty for my Sims 3 Creations
For something non Sims - check out the miniatures I make at MiniisByTwinmum